Seamless Gutters, Downspouts & De-Icing · Lehi & Wasatch Front
Gutters & Drainage Service in Utah County & Salt Lake Valley
Proper roof drainage protects your siding, fascia, and foundation footings from costly water damage. We fabricate and install heavy-gauge seamless gutters, high-capacity downspouts, and freeze-defense systems built for Utah’s heavy snowpack and sudden rainstorms.
⭐⭐⭐⭐⭐ 5.0
Google Reviews
Licensed & Insured
Utah GC Lic. #13861046-5501
10+ Years
Serving Utah County
Custom
Fabrication
Gutters Overflowing, Sagging, or Pulling Away?
When gutters sag or detach under the weight of winter snow, roof runoff spills directly into basement window wells and foundation walls.
Then skip the form and call us. We provide prompt inspections, emergency re-securing, corner leak resealing, and downspout clear-outs to keep runoff moving away from your home.
Signs Your Gutter System Is Failing
Utah’s intense freeze-thaw cycles, winter snow loads, and windblown debris place heavy mechanical stress on your gutter line. If you notice any of these warning signs, your drainage system is compromised:
Gutters Pulling Away from the Roofline
Heavy snow and ice buildup rip standard spike-and-ferrule hangers straight out of the wood. When gutters pull forward, runoff spills behind the trough and rots your fascia board.
Water Spilling Over During Normal Rainfall
If water sheets over the edge during moderate rain, your troughs are either undersized (5-inch vs. 6-inch), improperly sloped, or clogged with shingle granules and debris.
Peeling Paint, Rot, or Water Marks on Fascia & Siding
Staining on the wood behind your gutters or dirty streaks on your exterior walls mean water is leaking through failed corner seams or overflowing behind the back lip.
Erosion, Puddling, or Clay Soil Foundation Stress
Local clay soil expands when roof runoff dumps near your perimeter. This creates severe hydrostatic pressure that cracks basement walls, leaks into window wells, and heaves concrete flatwork.
Not sure if you need a targeted reseal, new downspout extensions, or a complete seamless upgrade? We inspect your gutter line and fascia boards, show you photo documentation, and provide an honest recommendation.
Comprehensive Gutter & Drainage Services
From on-site seamless fabrication to foundation drainage extensions and winter heat trace systems, we install complete roof water management systems.
Seamless Gutter Systems & Custom Sizing
- On-Site Seamless Gutter Fabrication: Heavy-gauge aluminum troughs custom-rolled to the exact inch in your driveway. Zero mid-run seams to split in freezing weather, secured with hidden brackets screwed into the fascia.
- Custom Sizing (5-Inch & High-Capacity 6-Inch): We size your troughs and downspouts to your specific roof pitch and surface area, ensuring high-volume capacity for steep roofs and sudden Wasatch cloudbursts.
Gutter Replacement & Fascia Restoration
- Complete Gutter Tear-Off & Replacement: Careful removal and recycling of dented, rusted, or leaking sectional gutters without damaging your drip edge or existing roof shingles.
- Fascia Board Repair & Rot Replacement: We inspect the wood behind your old gutters. Any rotted, soft, or water-damaged fascia boards are replaced with fresh lumber and sealed before new heavy-duty screw hangers are installed.
Water Diversion & Downspout Extensions
- Oversized Downspout Upgrades (3×4-Inch): Replacing restrictive small downspouts with commercial-capacity spouts that drain large volumes quickly without clogging from twigs or leaves.
- Surface & Buried Drainage Extensions: We install hinged cleanout extensions or connect spouts into underground lines to discharge runoff 6–10+ feet away from basement walls and landscaping.
Clog Prevention & Freeze Defense
- Gutter Guard & Micro-Mesh Filtration: Premium aluminum guards that lock out cottonwood fluff, scrub oak leaves, and pine needles while maintaining maximum water flow and ending seasonal ladder maintenance.
- Self-Regulating De-Icing Heat Cable: Commercial-grade heat trace cables installed in gutters, downspouts, and roof valleys to create melt pathways, preventing destructive winter ice dams and frozen downspouts.
Because gutters are part of your complete roof system, we verify your drip edge, eave flashing, and roofline alignment during every visit.
What Affects Gutter Installation Cost?
Every gutter project is calculated by linear footage, height, and water management requirements:
Linear Footage & Roof Geometry
Total perimeter length, number of inside/outside corners, and multi-story access requirements.
Gutter Sizing (5" vs. 6")
6-inch oversized gutters hold nearly 40% more water volume than standard 5-inch gutters, requiring heavier hangers and larger downspouts.
Material & Color Options
Durable heavy-gauge aluminum with baked-on enamel finishes versus heavy-duty steel or specialty metals.
Fascia Wood Repairs
Whether rotted wood discovered behind old gutters must be replaced before installing new hangers.
Add-Ons (Guards & Heat Trace)
Micro-mesh leaf protection systems or self-regulating winter de-icing cables.
Because pitch, corners, and fascia health vary on every home, we don’t guess from the street. You receive a firm, itemized written price after a free on-site inspection.
Need financing for a larger exterior project? We offer flexible monthly payment options — see our financing page for details.
How We Restore or Replace Your Gutters in 4 Steps
From slope calibration to ground cleanup, our process is thorough and clean.
1
On-Site Inspection & Pitch Calculation
We measure your rooflines, evaluate downspout drainage discharge points, check the condition of your fascia boards, and calculate water volume requirements.
2
Detailed, Firm Estimate
You receive a clear, written proposal specifying gutter gauge, size (5" or 6"), downspout layouts, guard options, and warranty terms — with no surprise change orders.
3
On-Site Fabrication & Heavy-Duty Mounting
We roll-form seamless troughs on-site to exact exterior dimensions, fasten them with heavy-duty hidden screw hangers at tight snow-country spacing, and seal all corner miters with commercial-grade sealant.
4
Water Flow Testing & Cleanup
We test the slope with water to confirm positive drainage to every downspout, sweep work areas clean of metal shavings and fasteners, and deliver your written workmanship warranty.
Why Property Owners Choose Rooval Roofing
Rooval Roofing is a local, family-run company headquartered in Lehi, serving Utah County and the Salt Lake Valley.
Licensed & Insured
Utah GC License #13861046-5501
Documented Inspections
Every inspection includes photos you keep
Workmanship Warranty
Written warranty on every gutter and roof project we complete
Financing Available
Flexible payment plans for exterior home projects
Insurance Claims Support
Photo documentation ready for your adjuster
We’ll also tell you when simple resealing or a tune-up serves you better than a full replacement — if that’s the honest answer, that’s what you’ll get.
5.0 ⭐⭐⭐⭐⭐ from Google Reviews
Utah GC Lic. #13861046-5501
Areas We Serve
Installing seamless gutters, downspouts, and freeze defense systems throughout Utah County and the Salt Lake Valley from our Lehi headquarters — including Lehi, Provo, Orem, Highland, Alpine, American Fork, Pleasant Grove, Draper, South Jordan, and Sandy.
Gutters & Drainage FAQs
Why should I choose seamless gutters over store-bought sectional gutters?
Sectional gutters from big-box stores are pieced together every 10 feet with caulked joints that inevitably leak, warp, and catch debris. Seamless gutters are custom-extruded on-site in one continuous piece from corner to corner, eliminating mid-run seams and dramatically reducing leak points.
Should I choose 5-inch or 6-inch gutters for my Utah home?
While 5-inch gutters work on smaller, low-slope roofs, we generally recommend 6-inch seamless gutters for Utah homes. 6-inch troughs hold roughly 40% more water, accommodating intense summer downpours, steep roof pitches, and heavy winter slush without overflowing.
How do heat cables prevent ice dams?
Self-regulating heat cables don’t melt all the snow on your roof; instead, they melt open channels through heavy snow and ice at the eaves and downspouts. This allows pooling meltwater to drain freely rather than backing up under your shingles and into your home.
Can you replace rotted fascia boards during the gutter installation?
Yes. If we uncover rotted or soft wood once old gutters are removed, our crew removes the damaged wood and installs fresh, primed fascia before mounting the new gutters. We disclose our per-foot wood replacement rate upfront.
Do gutter guards really work in Utah?
Yes, for debris. High-quality micro-mesh and aluminum screen guards effectively keep out cottonwood fluff, scrub oak leaves, and pine needles so water drains freely. However, gutters and guards should work alongside proper attic ventilation and insulation to minimize winter ice damming.
Protect Your Foundation with Proper Roof Drainage
Schedule your free inspection, review drainage options, and receive a firm, written price before any work begins.
Licensed & Insured · Utah GC #13861046-5501 · ★★★★★ 5.0 Google reviews · On-Site Fabrication